When you configure Cyphort integration to send log data to USM Anywhere, you can use the Cyphort plugin to translate the raw log data into normalized events for analysis.
|Device type||Unified Threat Management|
|Vendor documentaton||See the Cyphort CEF & Syslog Support for SIEM Reference on the vendor's Support web pages.|
Before you configure the integration, you must have the IP Address of the USM Anywhere Sensor.
To configure Cyphort to send log data to USM Anywhere
From the Cyphort web UI, go to Config > Notifications > SIEM Settings.
Indicate the following parameters (shown in the following illustration):
- Data types to forward
- CEF format
- All malware
- Days and dates that trigger data forwarding
- In the Hostname field, add the IP address of the USM Anywhere Sensor.
- In the Port number field, type 514 for UDP transport.
- Click Save.
On the host name field add the AlienVault USM Anywhere Sensor IP, and in the port number field the port 514.
For plugin enablement information, see Manual Plugin Management.
Available Plugin Fields
The following plugin fields are important attributes extracted from the syslog message. The USM Anywhere reports use these fields, and you can also reference them when creating custom reports. In addition to reporting, the USM Anywhere correlation rules make use of these fields.
For troubleshooting, refer to the vendor documentation: