Documentation Center
AlienVault® USM Anywhere™

Sophos Cyberoam

When you configure Sophos Cyberoam integration to send log data to USM Anywhere, you can use the Sophos Cyberoam plugin to translate the raw log data into normalized events for analysis.

Device Details
Device vendor Sophos
Device type Firewall
Connection type syslog
Vendor link https://kb.cyberoam.com/default.asp?id=1709

Cyberoam Integration

Before you configure the integration, you must have the IP Address of the USM AnywhereUSM Appliance Sensor.

To configure Cyberoam to send log data to USM Anywhere

  1. On the Cyberoam Firewall, go to Logs & Reports > Configuration > Syslog Server and click Add.
  2. Configure the syslog server (USM Anywhere sensor) by providing values for these parameters:

    • Name — USM Anywhere
    • IP Address — USM Anywhere sensor IP Address
    • Port — 514
    • Facility — DAEMON
    • Severity Level — Debug
    • Format — CyberoamStandardFormat
  3. Click OK.
  4. Specify the logs to be stored in the USM Anywhere sensor:

    1. Go to Logs & Reports > Configuration > Log Settings.
    2. Specify the kinds of logs to be recorded in the USM Anywhere sensor you just configured as the syslog server.
    3. Verify the required types of logs.

Plugin Enablement

For plugin enablement information, see Manual Plugin Management.

Available Plugin Fields

The following plugin fields are important attributes extracted from the syslog message. USM Anywhere reports use these fields, and you can also reference them when creating custom reports. In addition to reporting, the USM Anywhere correlation rules make use of these fields.

Note: The custom fields shown below are prefilled with the values shown. You cannot change these.

  • application

  • authentication_mode

  • bytes_in

  • bytes_out

  • customfield_0 → dir_disp

  • customfield_1 → connevent

  • customfield_2 → src_country_code

  • customfield_3 → dst_country_code

  • customfield_4 → appfilter_policy_id

  • customfield_5 → ips_policy_id

  • customfield_6 → srczonetype

  • customfield_7 → dstzonetype

  • destination_address

  • destination_dns_domain

  • destination_mac

  • destination_port

  • destination_translated_address

  • destination_translated_port

  • device_inbound_interface

  • device_outbound_interface

  • duration

  • email_recipient

  • email_sender

  • email_subject

  • event_action

  • event_category

  • event_name

  • event_severity

  • event_type

  • packets_sent

  • packets_received

  • policy

  • rep_device_model

  • rep_device_rule_id

  • request_content_type

  • request_model

  • request_url

  • source_address

  • source_dns_domain

  • source_mac

  • source_port

  • source_translated_address

  • source_username

  • time_zone

  • timestamp_occurred

  • transport_protocol

  • user_group_id

Troubleshooting

For troubleshooting, refer to the vendor documentation:

https://kb.cyberoam.com/default.asp?id=2075