Documentation Center
AlienVault® USM Appliance™

CrushFTP

When you configure CrushFTP to send log data to USM Appliance, you can use the CrushFTP plugin to translate the raw log data into normalized events for analysis.

Device Details
Vendor CrushFTP
Device Type FTP Server
Connection Type Syslog
Data Source Name CrushFTP
Data Source ID 1903

Integrating CrushFTP

Before you configure the CrushFTP integration, you must have the IP Address of the USM Appliance Sensor.

To configure CrushFTP to send Syslog messages to USM Appliance

  1. Open the Logging tab page from the CrushFTP web UI.

  2. Select SysLog from the drop-down menu in the Logging Provider field.
  3. Enter 514 in the UDP port number field.
  4. Enter the USM Appliance IP address in the Host field.

Plugin Enablement

For plugin enablement information, see Enable Plugins.

Additional Resources and Troubleshooting

http://www.crushftp.com/crush8wiki/Wiki.jsp?page=Main , http://www.crushftp.com/crush8wiki/Wiki.jsp?page=Syslog

For troubleshooting, refer to the vendor documentation:

http://www.crushftp.com/crush8wiki/Wiki.jsp?page=FAQ