Documentation Center
AlienVault® USM Appliance™

D-Link Wireless Controller

When you configure D-Link Wireless Controller to send log data to USM Appliance, you can use the D-Link Unified Wireless Controller plugin to translate the raw log data into normalized events for analysis.

Device Details
Vendor D-Link
Device Type Wireless Security/Management
Connection Type Syslog
Data Source Name Dlink-wireless
Data Source ID 1867

Integrating D-Link Wireless Controller

Before you configure the D-Link Wireless Controller integration, you must have the IP Address of the USM Appliance Sensor.

To configure the D-Link Wireless Controller to send Syslog messages to USM Appliance

  1. From the controller's management GUI, select the Tools > Log Settings > Remote Logging option and then go to the Syslog Server Configuration section of the Remote Logging Configuration page.

  2. Enable a syslog server and specify the IP address of the USM Appliance Sensor.
  3. Save your changes.

Note: You can specify the granularity of log messages from the wireless controller's Tools > Log Settings > Logs Facility page.

Plugin Enablement

For plugin enablement information, see Enable Plugins.

Additional Resources and Troubleshooting

https://www.manualslib.com/manual/807482/D-Link-Dwc-1000.html?page=336#manual

For troubleshooting, refer to the vendor documentation:

https://www.manualslib.com/manual/451489/D-Link-Dwc-1000.html?page=211