Documentation Center
AlienVault® USM Appliance™

F5 FirePass Big-IP

When you configure F5 FirePass Big-IP to send log data to USM Appliance, you can use the F5 FirePass Big-IP plugin to translate the raw log data into normalized events for analysis.

Device Details
Vendor F5
Device Type VPN Concentrator
Connection Type Syslog
Data Source Name f5-firepass
Data Source ID 1674

Integrating FirePass Big-IP

Before you configure the F5 FirePass Big-IP integration, you must have the IP Address of the USM Appliance Sensor.

To configure FirePass Big-IP to send log data to USM Appliance

  1. Log into the F5 Web Interface.
  2. Navigate to Device Management > Maintenance > Logs.
  3. In the System Logs section, select Enable Remote Log Server.
  4. Select Enabled Extended System Logs.
  5. Enter the IP address of a USM Appliance Sensor in the Remote Host field.
  6. Select Apply System Log Changes.

Plugin Enablement

For plugin enablement information, see Enable Plugins.

Troubleshooting

For troubleshooting, refer to the vendor documentation:

https://support.f5.com/kb/en-us/solutions/public/13000/000/sol13080.html

https://support.f5.com/kb/en-us/solutions/public/9000/100/sol9133.html