Documentation Center
AlienVault® USM Appliance™

HP BladeSystem Chassis

When you configure HP BladeSystem to send log data to USM Appliance, you can use the HP BladeSystem Chassis plugin to translate the raw log data into normalized events for analysis.

Device Details
Vendor HP
Device Type Infrastructure Monitoring
Connection Type Syslog
Data Source Name HP-chassis
Data Source ID 1870

Integrating HP BladeSystem

Before you configure the HP BladeSystem integration, you must have the IP Address of the USM Appliance Sensor.

To configure HP BladeSystem to send Syslog messages to USM Appliance

  1. From the Active Onboard Administrator GUI, open the System Log subcategory.
  2. On the Log Options tab page, select the Enable remote system logging checkbox.
  3. in the Syslog Server Address field, specify the USM Appliance IP address/hostname.
  4. In the Port field, add 514.
  5. Click Apply to save your settings.

Plugin Enablement

For plugin enablement information, see Enable Plugins.

Additional Resources and Troubleshooting

http://bladesystem.helpmax.net/en/configuring-the-hp-bladesystem-c7000-enclosure-and-enclosure-devices/onboard-administrator-module/system-log/log-options-tab/

For troubleshooting, refer to the vendor documentation:

https://www.hpe.com/emea_europe/en/support.html