Documentation Center
AlienVault® USM Appliance™

Thycotic Software Secret Server

When you configure Thycotic Software Secret Server to send log data to USM Appliance, you can use the Thycotic Software Secret Server plugin to translate the raw log data into normalized events for analysis.

Device Details
Vendor Thycotic Software
Device Type Data Protection
Connection Type Syslog
Data Source Name Secret-server
Data Source ID 1909

Integrating Thycotic Software Secret Server

Before you configure the Thycotic Software Secret Server integration, you must have the IP Address of the USM Appliance Sensor.

To configure Thycotic Software Secret Server to send Syslog messages to USM Appliance

  1. From the Thycotic Secret Server web UI, select Administration > Configurationand then click the Edit button.
  2. Select or check the Enable Syslog/CEF Logging check box.
  3. Enter the following values for the three additional settings that appear:
    • Syslog/CEF Server: The IP Address of the USM Appliance Sensor.
    • Syslog/CEF Port: 514.
    • Syslog/CEF Protocol: UDP.
  4. After entering the values, click Save.

Plugin Enablement

For plugin enablement information, see Enable Plugins.

Additional Resources and Troubleshooting

https://thycotic.force.com/support/s/secretserver

https://thycotic.force.com/support/s/article/Secret-Server-End-User-Guide

For troubleshooting, see the vendor documentation.